Mustang Motorcycle Seats One-Piece Deluxe DayTripper Seat - Harley-Davidson Softail - Manual (Page 5)

Mounting Suggestions
Harley-Davidson® Softail 1984-99
Passenger Seat
Baseplate Features:
Seats are built on 16 gauge formed steel baseplates. The baseplates
have rubber supports at contact points. Rear seat features carpet to
protect the fender.
NOTE: Mustang Softail seats will fit all Softail models except
1999­earlier FLSTS Heritage Springers.
Mounting of Mustang Passenger Seat
1. Remove Mustang solo seat from bike.
2. Remove two 1/4‐20 screws located at back of Mustang solo seat baseplate.
3. Align passenger seat front chrome tabs with threaded holes in back of solo baseplate.
4. Secure rear seat and solo together with screws from step 2. Seat becomes a 1‐piece unit.
5. Align chrome rear tab with threaded fender hole and secure with stock screw.
6. Install and tighten side mount bolts.
These steps are guidelines to help you install your new Mustang Product. If you need further
assistance, please call us at 800‐243‐1392 or 860‐582‐9633, Monday through Friday 9:00 – 5:30
Eastern or send an e‐mail to
[email protected] or visit our website at
www.mustangseats.com .
For care and maintenance of our seats, please go to our website under “Support” .
Refers to part numbers 75513, 75514, 75492, 75751, 75513, 79134, 79114, 75764, 75509, 79249, 75142,
79229, 75123
NOTE: Mustang passenger seat can only be mounted to a Mustang solo seat.
Enjoy the comfort of your
new Mustang seat!
back