SCANTECH ID (Champtek company) FI300 - Manual (Page 11)

Autostand
This mode allows you to switch from Flashing trigger
mode to Level trigger mode.
Autostand begins in flashing mode: At power up the
lighting and decoding are on (no need to activate the
trigger line) and after a period of inactivity lasting the
time specified by the trigger timeout, the scanner starts
flashing.
To switch to Level trigger mode activate the trigger line
(press the trigger).
When in Level trigger mode, after a period of inactivity
lasting the time specified by the trigger timeout, the
scanner switches back to flashing mode.
Toggle
This mode allows lighting and decoding toggle when
the trigger line is activated.
First trigger activation = lighting and decoding on,
second trigger activation = lighting and decoding off.
Presentation
This mode allows power up lighting and decoding are
on. After a period of inactivity lasting the time specified
by the trigger timeout, the lighting turns off or is
dimmed. When a new bar code is presented the
lighting and decoding restart and stay on until another
period inactivity.
9