SCANTECH ID (Champtek company) FI300 - Manual (Page 16)

6. Imager Settings
6.1 Imager Mode
You can set the best reading performance depends on
the environment, your used application and type of
barcodes.
• Linear mode for decode 1D Barcodes.
• Area mode for decode 1D and 2D barcodes.
Area mode allows you to set the position of the VEGA
in any direction regardless of the orientation of the
barcode, and perform a good read on 1D and 2D
barcodes.
Linear mode allows you to increase your decoding
speed while scanning 1D barcodes. But, you need to
position the beam across all bars in the 1D barcode.
Linear imager
<Area imager>
Area imager
Bright Environment
Area imager with
Reflective Surface
14