SCANTECH ID (Champtek company) Castor C-5010 - Manual (Page 15)

ASCII code
0E Hex
0F Hex
05 Hex
function
enable (cancels disable)
disable
power-up re-initialization
byte is also called:
Shift Out or <Ctrl-N>
Shift In or <Ctrl-O>
ENQ or <Ctrl-E>
12 Hex sleep DC2 or <Ctrl-R>
14 Hex wake (cancels sleep) DC4 or <Ctrl-T>
1.6 CONTROLLING THE SCANNER FROM THE POS SYSTEM
The Castor C-5010 can be controlled from the POS system via the RS232C
interface. Control is achieved by transmitting the following single byte
commands to the scanner. In the Scantech default setting the following
commands are available (more details upon request):
The Castor C-5010 9
45 ¡
2.
3.
Position Top deck in angle of 45 ¡
Keep Top deck inclined
while removing