SCANTECH ID (Champtek company) Scan Kiosk SK-40 - Manual (Page 34)

30
2.4 POWER OVER ETHERNET
The exceptional low power consumption of SK series enables us to offer the
ScanKiosks Powered-over-Ethernet (POE). This is the alternative for powering
the SK-40/50 through an external PSU adapter. In this way the device gets its
DC power directly from the powered (IEEE 802.3af compliant) Ethernet.
There is no need to install a (230/110VAC) mains socket in the middle of
the store. This SK-40/50 feature reduces the total installation costs.
This SK-40/50-POE version complies with the official standard: IEEE 802.3af.
The standard CAT5 network cable (8 pin, fully wired) can be used, with the regular
maximum length of 100 meter.
Towards the host-side this means that a hub/router is required, supporting the
Power-Over-Ethernet (PoE) feature, complying with the official standard for this:
IEEE 802.3af. To avoid any mis-communication in this area: Scantech does not
supply network components like power injectors, network cabling or powered
hubs.
NOTE
POE is an optional feature