SCANTECH ID (Champtek company) LIBRA L-7050 - Manual (Page 4)

Copyright
©
2010, Scantech-ID BV.
This manual is copyrighted, with all rights reserved. Under the copyright laws, this manual may not, in
whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic medium or
machine readable form without prior written consent of Scantech-ID BV.
Limited Warranty
Under all circumstances this manual should be read attentively, before installing and/or using the product.
In no event shall Scantech-ID BV be liable for any direct, indirect, special, consequential or incidental
damages arising out of the use or inability to use this docum entation or product, even if advised of the
possibility of such dam ages. In particular, Scantech-ID BV shall not be liable for any hardware, software,
or data that is stored or used with the product, including the cost of repairing, replacing or recovering the
above. Scantech-ID BV reserves the right to change parts of the device at any time without preceding or
direct announcem ent to the client.
Scantech-ID BV reserves the right to revise this m anual, and to make changes in the contents without
obligation to notify any person or entity of the revision or change. A serial number appears on the product.
Make sure that this official registration number has not been removed. It should be used whenever
servicing by Scantech-ID BV or an authorized Scantech dealer is necessary.
Important
This equipm ent has been tested and found to comply with the limits for a Class B digital device, pursuant
to EN55022, and with the limits for a class A digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference when the equipm ent is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the user
‟s manual, may cause harmful interference
to radio communications. Operation of the equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense. Any
unauthorized changes or m odifications to this equipment could void the user
‟s authority to operate
this equipment.
For CE-countries:
– LIBRA is in conformity with the CE standards. Please note that a Scantech CE-marked power supply
unit should be used to conform to these standards.
V4.0 Jan. 2014