Connecting, 2 connecting – SCANTECH ID (Champtek company) MICA M-9030 User Manual
Page 16
Advertising
Installation
10
NOTE
This scanner beeps whenever data has been read correctly. Both
frequency and volume can be adjusted (see section 2.1.1 Speaker
frequency and 2.1.2 Speaker volume on the Configuration Guide).
2.2 CONNECTING
Interface Selection
This scanner allows you to connect your host system using four different interface
cables: RS232, Keyboard Wedge, USB, and Powered USB. On powering up, the scanner
senses the type of the interface used and switches to the appropriate protocol.
Interface Cable
Connector type
RS232 (Product Number: 0114-SM01121)
Sub-D 9-pin
Keyboard Wedge (Product Number: 0114-SM02121)
Standard PS2
USB (Product Number: 0114-SM04121)
USB connector
Advertising