SCANTECH ID (Champtek company) MICA M-9030 - Manual (Page 26)

Using this Scanner 20
3.2 CONTROLLING
This scanner can be controlled from the POS/PC system via the RS232 interface or via
USB while using comport emulation. Control is achieved by transmitting single byte
commands to the scanner. The following commands are available:
ASCII code Function Byte is also called
05 Hex Power-up re-initialization ENQ or <Ctrl-E>
0E Hex Enable (cancels disable) Shift Out or <Ctrl-N>
0F Hex Disable Shift In or <Ctrl-O>
12 Hex Sleep DC2 or <Ctrl-R>
14 Hex Wake (cancels sleep) DC4 or <Ctrl-T>
NOTE
More commands are available upon request. Please contact your
dealer for more information.
3.3 MAINTAINING
This scanner requires little maintenance. Only occasional cleaning of the scanner
window is necessary to remove dirt and fingerprints. Cleaning can be performed
during operation with a non-abrasive glass spray cleaner and a soft lint-free cloth.
NOTE
Please contact your dealer for specific cleaning material.