Terminal connections – Q-Tech QT606L User Manual
Page 5
NOTES:
1. Dimensions are in inches.
2. Lead numbers are for reference only and are not marked on the unit.
3. A triangle symbol is marked on the corner of the package to indicate Pin 1.
4. All pins with function NC and/or ITP may not be connected as external tie or connections.
Vcc
14
Ground
7
N/C
13
N/C
6
N/C
12
N/C
5
N/C
11
N/C
4
N/C
10
N/C
3
N/C
9
N/C
2
OUTPUT
8
N/C
1
CONNECTION
TERMINAL NO.
CONNECTION
TERMINAL NO.
TERMINAL CONNECTIONS
FIGURE 1. PACKAGE DIMENSIONS AND TERMINAL CONNECTIONS
THIS DOCUMENT IS CONSIDERED PROPRIETARY TO Q-TECH CORPORATION
DO NOT COPY OR DISTRIBUTE WITHOUT Q-TECH CORPORATION APPROVAL
Q-Tech Corporation
10150 W. Jefferson Blvd.
Culver City, CA. 90232
Specification number: QT606L rev. C
Sheet 5 of 5
ITAR-CONTROLLED Q-TECH PROPRIETARY DO NOT COPY OR DISTRIBUTE WITHOUT Q-TECH APPROVAL