Q-Tech QT641C - Manual (Page 5)

NOTES:
1. Dimensions are in inches.
2. Lead numbers are for reference only and are not marked on the unit.
3. A triangle symbol is marked on the corner of the package to indicate Pin 1.
4. All pins with function NC and/or ITP may not be connected as external tie or connections.
PACKAGE DIMENSIONS AND TERMINAL CONNECTIONS
THIS DOCUMENT IS CONSIDERED PROPRIETARY TO Q-TECH CORPORATION
DO NOT COPY OR DISTRIBUTE WITHOUT Q-TECH CORPORATION APPROVAL
Q-Tech Corporation
10150 W. Jefferson Blvd.
Culver City, CA. 90232
Specification number: QT641C rev. C
Sheet 5 of 5
Vcc 14 GND/CASE 7
OUTPUT 8 N/C 1
CONNECTION TERMINAL NO CONNECTION TERMINAL NO
ITAR-CONTROLLED Q-TECH PROPRIETARY DO NOT COPY OR DISTRIBUTE WITHOUT Q-TECH APPROVAL