Q-Tech QT725C - Manual

51774 A
Sheet 1 of 5
CAGE CODE SIZE SCALE:
NONE
T.Mitchell
DATE RELEASED BY
REV.
A
DRAWING NO.
QT725C
B.Remtulla
DATE CHECKED BY
Hybrid Voltage Controlled Crystal Oscillator,
+5V, Class S, Detail Specification For
C.Hooper
DATE PREPARED BY
UNLESS OTHERWISE
SPECIFIED DIMENSIONS ARE
IN INCHES.
TOLERANCES:
3 PLACE DECIMAL = .005
2 PLACE DECIMAL = .02
1 PLACE DECIMAL = .1
FRACTIONS = ± 1/16
ANGLES = 2 DEGREES
Q-TECH CORPORATION
10150 W. JEFFERSON BLVD.
CULVER CITY, CA. 90232-3510
SPECIFICATION CONTROL DRAWING
4/27/09
Change General Specification reference to 401-0298-018. Paragraph 3.3.3 and Table III
changes for improved margin, design simplification. Corrected package drawing.
A
Initial release -
APPROVED DATE DESCRIPTION REVISION
REVISIONS