Q-Tech MILITARY TCXO - Manual (Page 5)

5
Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-tech.com
ANALOG TCXO
DUAL-IN-LINE CRYSTAL OSCILLATORS
3.3 to 5Vdc - 10MHz to 80MHz
Analog TCXO (Revision D, December 2011 ) (ECO# 10367)
Q-TECH
CORPORATION
Environmental Specifications
Q-Tech Standard Screening similar to (MIL-PRF55310) is available. Q-Tech can also customize screening and test procedures to
meet your specific requirements. The packages are designed and processed to exceed the following test conditions:
Environmental Test Test Conditions
Temperature cycling MIL-STD-883, Method 1010, Cond. B
Constant acceleration MIL-STD-883, Method 2001, Cond. A, Y1
Seal Fine Leak MIL-STD-883, Method 1014, Cond. A
Burn-in 160 hours, 125°C with load
Aging 30 days, 70°C
Vibration sinusoidal MIL-STD-202, Method 204, Cond. D
Shock, non operating MIL-STD-202, Method 213, Cond. I
Thermal shock, non operating MIL-STD-202, Method 107, Cond. B
Ambient pressure, non operating MIL-STD-202, 105, Cond. C, 5 minutes dwell time minimum
Resistance to solder heat MIL-STD-202, Method 210, Cond. C
Moisture resistance MIL-STD-202, Method 106
Terminal strength MIL-STD-202, Method 211, Cond. C
Resistance to solvents MIL-STD-202, Method 215
Solderability MIL-STD-202, Method 208
ESD Classification MIL-STD-883, Method 3015, Class 1HBM 0 to 1,999V
Moisture Sensitivity Level J-STD-020, MSL=1
Please contact Q-Tech for higher shock requirements
Frequency vs. Temperature Curve
Temperature ºC
Stability PPM
Typical Stability of QT3013C-80.000MHz