Media-Tech WLAN USB DONGLE 11n - Manual (Page 4)

4
EN 8� Click Install to install the drivers and utility�
9� If it is necessary to reboot the computer, select Yes,
I want to restart my computer now, to restart the
computer after the installation, or No, I will restart my
computer later, to restart the computer later�
10� Click Finish to complete the installer operation�
Configuration utility
Icon in the system tray
When the adapter is properly connected to the computer
and the drivers installed, the configuration utility will be
started with the system, and its icon will be displayed in
the system tray (next to the clock)� The icon changes ac-
cording to the adapter and/or wireless network connec-
tion status�
Client mode (wireless station):
Double click the icon to open the configuration utility
main window� Right-click the icon to display the context
menu:
■ Launch Config Utility – open the utility main window�
■ Switch to...Mode – switch the adapter operation mode:
• wireless station (Switch to Client mode)
• access point (Switch to AP mode)
• wireless station and access point (Switch to AP
Client+ mode) – Windows 7�
■ Exit – close the configuration utility icon�
The adapter is not connected to the computer�
Either the adapter is not connected to a wireless
network or the transmission is off�
The adapter is connected to a wireless network
and the signal strength is good�
The adapter is connected to a wireless network
and the signal strength is normal�
The adapter is connected to a wireless network
and the signal strength is poor�
The adapter is not connected to the computer�
Preparing the adapter for operation�
Adapter ready for operation�
AP mode (access point):
Main window – Client mode
In Client mode, the adapter works as a normal wireless
adapter� It is possible to connect to wireless networks in
the range�
2
1