Media-Tech WLAN USB DONGLE 11n - Manual (Page 5)

5
EN
2
1 Tab bar - click on the icon tab to display the content
in a new window�
Information panel - in this section contains informa-
tion about the active connection
Basic configuration of the connection
1� Click the icon (Site Survey) in the tab bar to display a
new window with the available wireless networks�
2� Click the icon (Rescan) to refresh the list of available
networks in the Site Survey�
3� Select the appropriate network by double-clicking on
the name, or select the network and click the icon
(Connect)�
4� If the network is not secured, the connection is estab-
lished automatically, and the connection parameters are
displayed in the information panel�
In the case of a secure network connection, it displays an
additional window to configure the network parameters
– Profiles� In this window, verify the type of security and
then click the icon  (Next) to enter a security password�
Again click the icon  (Next) to save your settings and
connect� Parameters of the active connection will be vis-
ible in the information panel�
Specification
Supported standards: IEEE 802�11n, IEEE 802�11g, IEEE
802�11b
Chipset: Ralink RT5370N
Channels (frequencies): EU 1–13 (2,412-2,472 GHz)
USA 1–11 (2,412-2,462 GHz)
Japan 1-14 (2,412-2,484 GHz)
Interface: USB
Security: WPA/WPA2, WPA-PSK/WPA2-PSK, WEP 64/128-
bit, 802�1x, WPS
Functions and technical specification of device are subject to
change without prior notice.
For technical support please visit www.media-tech.eu.