Dayton Audio DTA-120 Class T Digital Mini Amplifier 60 WPC - Manual

User Manual
www.daytonaudio.com
120 Watt Class T
Digital Audio Amplifier
Specifications:
Power Output: 60 watts RMS x 2 into 4 ohm
Total Harmonic Distortion: <0.01% @30W
<0.1% @60W
Minimum Speaker Impedance: 4 ohm
Signal-to-Noise Ratio: 103 dB, A weighted
Input Impedance: 2 k ohm ±5%
Frequency Response: 20-20,000 Hz
Channel Separation: 95 dB
Efficiency: 85%
Dynamic Range: >100 dB
Electrical Requirement: 24VDC @ 5A center pin positive
Dimensions: 2" H x 3.375" W x 6.250" D
Weight: 1.0 lbs
Package Contents:
• DTA-120 120W Digital Class T Amplifier
• World compatible 24V@5A switch mode power supply
• 2 sets of screw-type banana plugs for speaker connection
• 3.5mm to ¼" headphone adapter
• 3.5mm to 2 RCA “Y” cable
• 6" coiled 3.5mm audio input cable
Warranty
The Dayton Audio DTA-120 is warranted free from defects in material
and workmanship for one year from date of purchase. Warranty
does not apply to misuse, abuse, neglect, accident, improper use,
etc. Note: If an inappropriate power supply is used and the unit is
damaged, the warranty will be voided.
Model: DTA-120
Important Safety Instructions
To reduce the risk of electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified
personnel. To reduce the risk of fire and shock do not expose unit to rain or moisture. The unit should be connected to
an earth grounded AC electrical socket. The unit should be operated in a well ventilated area. Minimum clearance is 2
inches from the ventilation openings.
© Dayton Audio ® Last Revised: 7/23/2013