Locking the breaker operating mechanism – GE Industrial Solutions Record Plus TDM, NEMA 4__4X: FE250 User Manual
Page 6
Locking the breaker operating
mechanism
.
Push the slider down to
”OFF”
position of breaker
and insert the padlock shaft 3/16 in. (5 mm) to
5/16 in. (8 mm) into the slot in the padlock lever,
to prevent closing of the breaker during
maintenance, illustrated in Figure 11.
These instructions do not cover all details or variations in equipment nor do they provide for every possible
contingency that may be met in connection with installation, operation, or maintenance. Should further
information be desired or should particular problems arise that are not covered sufficiently for the purchaser’s
purposes, the matter should be referred to the GE Company. The circuit breaker is a sealed unit that contains no
user-serviceable parts. Tampering with the seal will void the warranty.
SLOT FOR PADLOCK
Figure 11. Locking the breaker operating mechanism during
emergency.
g
GE Consumer & Industrial
General Electric Company
41 Woodford Ave., Plainville, CT 06062
www.geindustrial.com
DEH41027 03 R0625431
© 2004 General Electric Company
DEH41027