GE Industrial Solutions Entellisys 5.0 Administrator Manual - Manual (Page 77)

Viewing and updating circuit breaker names 79
14
14 Other maintenance functions
14.1 Viewing and updating circuit breaker names
The HMI provides a tool to change the circuit breaker names corresponding to their location in
the switchgear.
To change the circuit breaker names
1. On the Main Menu, click the Maintenance button. The button will only be displayed if access
is allowed with the current login permissions.
2. Click the Breaker Names tab. A table will display as shown as in Figure 14-1.
Figure 14-1 Breaker Names screen
•
Breaker ID: Unique identifier for the circuit breaker. This is set by GE and cannot be changed.
•
Breaker Name: Unique name given to a circuit breaker (16 alphanumeric characters). This
may be set in the factory if information is provided from the customer. Otherwise, it should
be updated for ease of use with selection boxes.
•
Short Name: Unique short name given to a circuit breaker (8 alphanumeric characters). This
field is currently not used.