3 how to install, Af-650 gp operating instructions – GE Industrial Solutions AF-650 GP General Purpose Drive (230V to 50HP, 460_575V to 100HP) User Manual
Page 10
3 How to Install
3.1.1 About How to Install
This chapter covers mechanical and electrical installations to and from power terminals and control card terminals.
Electrical installation of options is described in the relevant Operating Instructions and Design Guide.
3.1.2 How to Get Started
AF-650 GP is designed to achieve a quick installation by following the steps described below.
Read the safety instructions before installing the unit.
Mechanical Installation
•
Mechanical mounting
Electrical Installation
•
Connection to Mains and Protecting Earth
•
Motor connection and cables
•
Fuses and circuit breakers
•
Control terminals - cables
Quick setup
•
Keypad
•
Auto Tuning of drive
•
Programming
Illustration 3.1: Diagram showing basic installation including mains, motor,
start/stop key, and potentiometer for speed adjustment.
AF-650 GP Operating Instructions
9
3