GE Industrial Solutions AF-600 FP Metasys - Manual (Page 31)

Internal Floating Point (ADF), continued..
NPT NPA UNIT DESCRIPTION RANGE PARAMETER NUMBER
ADF 100 - Control Timeout Function O-04
ADF 101 - Control Timeout Time O-03
ADF 110 Sec Option B Relay 1 ON Delay 0.01 to 600.00 E-26:6
ADF 111 Sec Option B Relay 1 OFF Delay 0.01 to 600.00 E-27:6
ADF 112 Sec Option B Relay 2 ON Delay 0.01 to 600.00 E-26:7
ADF 113 Sec Option B Relay 2 OFF Delay 0.01 to 600.00 E-27:7
ADF 114 Sec Option B Relay 3 ON Delay 0.01 to 600.00 E-26:8
ADF 115 Sec Option B Relay 3 OFF Delay 0.01 to 600.00 E-27:8
ADF 120 V Analogue Input X30/11 Low Voltage 0.07 to 10.00 AN-30
ADF 121 V Analogue Input X30/1 High Voltage 0.07 to 10.00 AN-31
ADF 122 V Analogue Input X30/12 Low Voltage 0.07 to 10.00 AN-40
ADF 123 V Analogue Input X30/12 High Voltage 0.07 to 10.00 AN-41
ADF 124 V Analogue Input X42/1 Low Voltage 0.07 to 10.00 AO-10
ADF 125 V Analogue Input X42/1 High Voltage 0.07 to 10.00 AO-11
ADF 126 V Analogue Input X42/3 Low Voltage 0.07 to 10.00 AO-20
ADF 127 V Analogue Input X42/3 High Voltage 0.07 to 10.00 AO-21
ADF 128 V Analogue Input X42/5 Low Voltage 0.07 to 10.00 AO-30
ADF 129 V Analogue Input X42/5 High Voltage 0.07 to 10.00 AO-31
ADF 130 % Analogue Output 42 Timeout Preset AN-54
ADF 131 % Analogue Output X30/8 Timeout Preset AN-64
ADF 132 % Analogue Output X42/7 Timeout Preset 0.00 to 100.00 AO-54
ADF 133 % Analogue Output X42/9 Timeout Preset 0.00 to 100.00 AO-64
ADF 134 % Analogue Output X42/11 Timeout Preset 0.00 to 100.00 AO-74
1 "Feedback" if closed loop - and "100 Hz" if open loop
2 Unit is power dependent
3 The drive must be stopped to change this point
4 The point is global in all 4 setups
5 Not availabele in all units.
AF-600 FP Metasys
30
3