GE Industrial Solutions SHHN000A3 HAMMERHEAD Series - Manual

GE
Datasheet
December 6, 2013
©2013 General Electric Corporation.
All rights reserved.
SHHN000A3 HAMMERHEAD* Series; DC-DC Converter Power Modules
Features
• Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
• Compliant to REACH Directive (EC) No 1907/2006
• Wide Input Voltage Range, 9Vdc to 36Vdc
• No minimum load for no damage operation
• Minimum efficiency – 84.0% at full load (Vin=24Vdc)
• Constant switching frequency
• Low output ripple and noise
• Small Size and low profile, follows industry standard
1x1 footprint
27.9mm x 24.4mm x 8.5mm (MAX)
(1.10 x 0.96 x 0.335 in)
• Surface mount (SMT) or Through hole (TH)
• Reflow process compliant, both SMT and TH versions
• Positive and Negative Remote On/Off logic
• Output overcurrent, overvoltage protection
• Over-temperature protection
• Wide operating temperature range (-40°C to 85°C)
• UL # Recognized to UL60950-1, CAN/CSA † C22.2
No.60950-1, and EN60950-1(VDE ‡ 0805-1) Licensed
• CE mark meets 2006/95/EC directive §
• Withstands 1600Vdc Isolation Voltage.
• ISO ** 9001 and ISO 14001 certified manufacturing
facilities
Applications
• Hybrid power architectures
• Industrial markets
Description
The SHHN000A3A HAMMERHEAD* series power modules are isolated dc-dc converters that designed to operate over a wide input
voltage range of 9 Vdc -36Vdc and provide a single precisely regulated output voltage at +15.0Vdc and -15.0Vdc. The outputs are
fully isolated from the input, allowing versatile polarity configurations and grounding connections. The modules exhibit a
minimum efficiency of 84.0% at full load and nominal input. Built-in filtering for both input and output minimizes the need for
external filtering. The module is fully self-protected with output over-current and over-voltage, over-temperature and input under
voltage shutdown control. Optional features include negative or positive on/off logic and SMT connections.
* Trademark of General Electric Corporation
# UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
# The PMBus name and logo are registered trademarks of the System Management Interface Forum (SMIF)
9Vdc – 36Vdc input; +15V, -15V Dual Output, 0.3A 9W Output
RoHS Compliant