GE Industrial Solutions 3A Digital PicoDLynx User Manual

3a digital picodlynx, Non-isolated dc-dc power modules, Data sheet

Advertising
background image

GE

Data Sheet

April 29, 2013

©2013 General Electric Company. All rights reserved.

3A Digital PicoDLynx

TM

: Non-Isolated DC-DC Power Modules

3Vdc –14.4Vdc input; 0.45Vdc to 5.5Vdc output; 3A Output Current

Features

•

Compliant to RoHS II EU “Directive 2011/65/EU”

•

Compatible in a Pb-free or SnPb reflow environment

•

Compliant to IPC-9592 (September 2008), Category 2,
Class II

•

DOSA based

•

Wide Input voltage range (3Vdc-14.4Vdc)

•

Output voltage programmable from 0.6Vdc to 5.5Vdc via
external resistor. Digitally adjustable down to 0.45Vdc

•

Digital interface through the PMBus

TM #

protocol

•

Tunable Loop

TM

to optimize dynamic output voltage

response

•

Flexible output voltage sequencing EZ-SEQUENCE

•

Power Good signal

•

Fixed switching frequency with capability of external
synchronization

•

Output overcurrent protection (non-latching)

•

Over temperature protection

•

Remote On/Off

•

Ability to sink and source current

•

Cost efficient open frame design

•

Small size: 12.2 mm x 12.2 mm x 6.25 mm
(0.48 in x 0.48 in x 0.246 in)

•

Wide operating temperature range [-40°C to

105°C

(Ruggedized: -D), 85°C(Regular)]

•

UL* 60950-1Recognized, CSA

†

C22.2 No. 60950-1-03

Certified, and VDE

‡

0805:2001-12 (EN60950-1) Licensed

•

ISO** 9001 and ISO 14001 certified manufacturing
facilities

Applications

Industrial equipment

Distributed power architectures

Intermediate bus voltage applications

Telecommunications equipment

Description

The 3A Digital PicoDLynx

TM

power modules are non-isolated dc-dc converters that can deliver up to 3A of output current. These

modules operate over a wide range of input voltage (V

IN

= 3Vdc-14.4Vdc) and provide a precisely regulated output voltage from

0.45Vdc to 5.5Vdc, programmable via an external resistor and PMBus control. Features include a digital interface using the PMBus

protocol, remote On/Off, adjustable output voltage, over current and over temperature protection. The PMBus interface supports a
range of commands to both control and monitor the module. The module also includes the Tunable Loop

TM

feature that allows the

user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to

savings on cost and PWB area.

*

UL is a registered trademark of Underwriters Laboratories, Inc.

†

CSA is a registered trademark of Canadian Standards Association.

‡

VDE is a trademark of Verband Deutscher Elektrotechniker e.V.

** ISO is a registered trademark of the International Organization of Standards

#

The PMBus name and logo are registered trademarks of the System Management Interface Forum (SMIF)

TRIM

VOUT

VS+

GND

RTUNE

CTUNE

RTrim

VIN

Co

Cin

Vout+

Vin+

ON/OFF

SEQ

MODULE

PGOOD

SMBALRT#

SIG_GND

ADDR1

RADDR0

CLK
DATA

ADDR0

VS-

RADDR1

GND

SYNC

RoHS Compliant

Advertising