Net Optics Direct-Attach SFP+ Cable - Manual

Direct-Attach SFP+ Cable
The Direct-Attach Cable, also known as a twinax cable,
saves cost, reduces complexity, and increases reliability of
short 10 Gigabit network links.
This 5-meter copper cable attaches directly between two
SFP+ slots in Net Optics data monitoring and network
controller switches, and equipment from most leading
network and monitoring suppliers. It carries 10 Gbps
traffic at full bandwidth, without the need for expensive
SFP+ transceivers and fiber cables.
Note: This cable is not compatible with RG-800 series
Regeneration Taps
Application diagram
Technical Specifications:
Operating:
Operating Temperature:
0ºC to 40ºC
Storage Temperature:
-55ºC to 85ºC
Relative Humidity:
5% min, 95% max,
non-condensing
Length: 5 meters
Medium: Copper, passive
Data rate: 10 Gbps
Connectors: (2) SFP+
Standards: SFF-8431 Compliant
Part Number: 490-0655-001
Compatibility:
Fully compatible with the following Net Optics
product families:
xBalancer
Director xStream
Director xStream Pro
iLink Agg xStream
Net Optics® is a registered trademark of Net Optics, Inc.
Copyright 1996-2011 Net Optics, Inc. All rights reserved.
Additional company and product names may be trademarks
or registered trademarks of the individual companies and
are respectfully acknowledged.
▶
5303 Betsy Ross Drive • Santa Clara, CA 95054
Tel: +1 (408) 737-7777 • www.netoptics.com