Asus Blitz Extreme - Manual (Page 66)

2-40 Chapter 2: Hardware information
1. Assemble the optional fan kit
by fitting the optional fan to the
grooved edge of the plastic fan
seat and snapping it into place.
2. The photo below demostrates the
the optional fan ready for use.
3. Slide the optional fan onto the
heatsink, then connect the fan
cable.
4. The photo shows the fan installed
on the motherboard.
• Plug the optional fan cables to the CHA_FAN1, CHA_FAN4 or PWR_FAN
connector on the motherboard.
• Make sure the optional fan is installed correctly to prevent damage to the
fan and motherboard components.
When you are using water-cooling modules, make sure to install TWO optional
fans to obtain a more effective heat dissipation.
Optional fan on the other side fins