4 extreme tweaker menu, 1 ai overclocking [auto, Cpu ratio control [auto – Asus Blitz Extreme User Manual

Page 91

Advertising
background image

ASUS Blitz Extreme

4-17

4.4

Extreme Tweaker menu

The Extreme Tweaker menu items allow you to configure overclocking-related

items.

Take caution when changing the settings of the Extreme Tweaker menu items.

Incorrect field values can cause the system to malfunction.

Select Screen

Select Item

+-

Change Field

Tab Select Field

F1 General Help

F10 Save and Exit

ESC Exit

v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.

BIOS SETUP UTILITY

Main

Extreme Tweaker

Advanced Power Boot Tools Exit

Configure System Frequency/Voltage

Ai Overclocking

[Auto]

CPU Ratio Control

[Auto]

DRAM Frequency

[Auto]

DRAM Timing Control

[Auto]

DRAM Static Read Control

[Auto]

DRAM Dynamic Write Control

[Auto]

Transaction Booster

[Auto]

Clock Over-Charging Mode

[Auto]

CPU Spread Spectrum

[Auto]

PCIE Spread Spectrum

[Auto]

Select the target CPU

frequency, and the

relevant parameters

will be auto-adjusted.

Frequencies higher

than CPU manufacturer

recomends are not

guaranteed to be

stable. If the system

becomes unstable,

return to the default.

4.4.1

Ai Overclocking [Auto]

Allows selection of CPU overclocking options to achieve desired CPU internal

frequency. Selct either one of the preset overclocking configuration options:

Manual

Allows you to individually set overclocking parameters.

Auto

Loads the optimal settings for the system.

Standard

Loads the standard settings for the system.

N.O.S.

The ASUS Non-delay Overclocking System feature intelligently

determines the system load and automatically boosts the

performance for the most demanding tasks.

N.O.S. Mode [Auto]

Configuration options: [Auto] [Standard] [Sensitive] [Heavy Load]

CPU Ratio Control [Auto]

Allows you to control the CPU ratio. Configuration options: [Auto] [Manual]

The following item only appears when you set the Ai Overclocking item to

[N.O.S].

The following item only appears when you set the CPU Ratio Control item to

[Manual].

Advertising