Asus F74 - Manual (Page 58)

58 Notebook PC User’s Manual
V
. Using
PC Cards (Cont’)
Inserting and Removing a PC Card
Follow these instructions, referring to the illustration to insert a PC Card:
1. Insert the PC Card, with the connector side first and label side up, into the socket until it locks firmly into place.
The eject lever protrudes out when the card is correctly inserted.
2. The eject lever can be tucked in by pushing it to the right, preventing breakage or accidental ejection.
3. Carefully connect any cables or adapters needed by the PC card.
Follow these instructions, referring to the illustration to remove a PC Card:
1. Remove any cables or adapters attached to the PC card you wish to remove.
2. Raise the tip of the eject lever that corresponds to the card you want to remove.
3. Press the tip of the lever in to eject the card, and then slowly remove the card.
NOTE! Type lll PC cards are designed to fit with the connector inserted into the lower PCMCIA socket.