Asus RS161-E5/PA2 - Manual (Page 59)

ASUS RS161-E5/PA2 4-11
4. Hard disk activity LED connector (4-pin HDLED1)
This connector is for the storage add-on card cable connected to the SCSI or
SATA add-on card. The read or write activities of any device connected to the
SCSI or SATA add-on card causes the front panel LED to light up.
KFSN4-DRE
®
KFSN4-DRE storage card activity LED connector
HDLED1
PIN1
ADD_IN_CARD-
NC
NC
ADD_IN_CARD-
5. USB connector (10-1 pin USB34)
This connector is for USB 2.0 ports. Connect the USB module cable to
this connector, then install the module to a slot opening at the back of the
system chassis. This USB connector complies with USB 2.0 specification that
supports up to 480 Mbps connection speed.
KFSN4-DRE
®
KFSN4-DRE USB connector
USB34
Power
PIN1
USB PortA(-) USB PortA(+
)
GND
Power USB PortB(-) USB PortB(+
)
GND NC