Asus ESC1000 Personal SuperComputer User Manual
Asus Computer hardware
Advertising
Table of contents
Document Outline
- About this guide
- Notices
- Safety information
- Chapter 1: Product introduction
- Chapter 2: Hardware setup
- Chapter 3: Motherboard Info
- Chapter 4: BIOS setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Ai Tweaker menu
- 4.4.1 Ai Overclock Tuner [Auto]
- 4.4.2 CPU Ratio Setting [Auto]
- 4.4.3 Intel(R) SpeedStep(TM) Tech [Enabled]
- 4.4.4 Intel(R) Turbo Mode Tech [Enabled]
- 4.4.5 DRAM Frequency [Auto]
- 4.4.6 UCLK Frequency [Auto]
- 4.4.7 QPI Link Data Rate [Auto]
- 4.4.8 DRAM Timing Control [Auto]
- 4.4.9 CPU Voltage [Auto]
- 4.4.10 CPU PLL Voltage [Auto]
- 4.4.11 QPI/DRAM Core Voltage [Auto]
- 4.4.12 IOH Voltage [Auto]
- 4.4.13 IOH PCIE Voltage [Auto]
- 4.4.14 ICH Voltage [Auto]
- 4.4.15 ICH PCIE Voltage [Auto]
- 4.4.16 DRAM Bus Voltage [Auto]
- 4.4.17 DRAM DATA REF Voltage on CHA/B/C [Auto]
- 4.4.18 DRAM CTRL REF Voltage on CHA/B/C [Auto]
- 4.4.19 Load-Line Calibration [Auto]
- 4.4.20 CPU Differential Amplitude [Auto]
- 4.4.21 CPU Clock Skew [Auto]
- 4.4.22 CPU Spread Spectrum [Auto]
- 4.4.23 IOH Clock Skew [Auto]
- 4.4.24 PCIE Spread Spectrum [Auto]
- 4.5 Advanced menu
- 4.6 Power menu
- 4.7 Boot menu
- 4.8 Tools menu
- 4.9 Exit menu
- Chapter 5: RAID configuration
- Chapter 6: Driver installation
- Chapter 7: Multiple GPU technology support