Asus ESC1000 Personal SuperComputer - Manual (Page 10)

x
DO NOT throw the motherboard in municipal waste. This product has been
designed to enable proper reuse of parts and recycling. This symbol of the
crossed out wheeled bin indicates that the product (electrical and electronic
equipment) should not be placed in municipal waste. Check local regulations for
disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste.
This symbol of the crossed out wheeled bin indicates that the battery should not
be placed in municipal waste.
About this guide
Audience
This user guide is intended for system integrators, and experienced users with at
least basic knowledge of configuring a server.
Contents
This guide contains the following parts:
1. Chapter 1: Product Introduction
This chapter describes the general features of the server, including sections
on front panel and rear panel specifications.
2. Chapter 2: Hardware setup
This chapter lists the hardware setup procedures that you have to perform
when installing or removing system components.
3. Chapter 3: Motherboard information
This chapter includes the motherboard layout and brief descriptions of the
jumpers and internal connectors.
4. Chapter 4: BIOS information
This chapter tells how to change system settings through the BIOS Setup
menus and describes the BIOS parameters.
5. Chapter 5: RAID configuration
This chapter provides instructions for setting up, creating and configuring
RAID sets using the available utilities.
6. Chapter 6: Driver installation
This chapter provides instructions for installing the necessary drivers for
different system components.
7. Chapter 7: Multiple GPU technology support
This chapter describes how to install and configure multiple ATI ®
CrossFireX™/ NVIDIA ® SLI™ graphics cards and NVIDIA ® CUDA technology.