Asus ESC1000 Personal SuperComputer - Manual (Page 165)

ASUS ESC1000 6-43
Restoring to factory settings
In the rare case that the system settings become corrupted, you can restore
Express Gate to its factory settings.
To restore Express Gate to factory settings
1. Click Configuration Panel in the LaunchBar.
2. In the Configuration Panel, click Environment Settings.
3. In the General tab, click Restore. A confirmation dialog box will open. Click
Yes to immediately restart Express Gate to finish clearing system settings. All
bookmarks, network settings, and other changes you made will be cleared.
The first-time Wizard will run again when you enter the Express Gate
environment after clearing its settings.
Configuring Express Gate in BIOS Setup
Enter BIOS setup by clicking Exit on the Express Gate First Screen, and then
press the <Del> key during POST. Express Gate configuration options are under
the Tools menu. See chapter 4 for details.
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power Boot Tools Exit
ASUS EZ Flash 2
Express Gate [Enabled]
Enter OS Timer [10 Seconds]
Reset User Data [No]
ASUS O.C. Profile
AI NET 2
The BIOS setup screens shown in this section are for reference purposes only,
and may not exactly match what you see on your screen.