Asus PSCH-SR/SCSI - Manual (Page 77)

ASUS PSCH-SR motherboard 4-21
Serial Port1 Address [3F8/IRQ4]
Serial Port2 Address [2F8/IRQ3]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
EPP Mode Select EPP1.7
ECP Mode Use DMA 3
SuperIO Device
Item Specific Help
Set Base I/O address
for serial port 1.
Select Menu
Super I/O Device
Serial Port 1 [3F8/IRQ4]
Serial Port 2 [2F8/IRQ3]
Allow you to select the serial port base addresses. Configuration options:
[Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] [Auto]
Onboard Parallel Port [378/IRQ7]
Allows you to select the parellel port base address.
Configuration options: [Disabled] [378/IRQ7] [278/IRG5] [3BC/IRQ7]
Parallel Port Mode [SPP]
Allows you to select the parallel port mode.
Configuration options: [SPP] [EPP] [ECP] [ECP+EPP] [Normal]
EPP Mode Select [EPP1.7]
Allows you to select the EPP mode. This item becomes configurable only if
the Parallel Port Mode is set to [EPP] or [ECP+EPP].|
Configuration options: [EPP 1.7] [EPP 1.9]
ECP Mode Use DMA [3]
Allows you to select the ECP mode. This item becomes configurable only
if the Parallel Port Mode is set to [ECP] or [ECP+EPP].
Configuration options: [1] [3]