Asus WL-320gP - Manual (Page 13)

1. Introduction
ASUS 802.11g Access Point 13
Chapter 1 - Introduction
1..2 Rear panel features
The rear panel contains the Ethernet, the DC port, and the Reset button.
Label Description
ETHERNET The Ethernet port connects to an Ethernet device such as to a
switch (either Power over Ethernet support or not) or to a router.
RESET Press the Reset button to restore to factory default settings.
DC The DC port connects to the power adapter This port will not be
used if using Power over Ethernet switch or injector.
LINK (Link Status)
Operation Mode AP/Repeater/Bridge/
Gateway
Client
OFF Client not associated Not associated to AP
ON Client associated Associated to AP with
strong signal
Blinking quickly -- Associated to AP with better
signal
Blinking slowly -- Associated to AP with weak
signal