Asus WL-320gP - Manual (Page 22)

3. Software
22 ASUS 802.11g Access Point
Chapter 3 - Software Configuration
WLAN Utilities
3.3 Firmware Restoration
The Firmware Restoration utility is an emergency rescue tool that can
automatically searches for an ASUS 802.11g AP that has failed during a
firmware upload, and re-upload a firmware that you specify. A failed firmware
upgrade will cause the ASUS 802.11g AP to enter a failure mode, waiting
for the Firmware Restoration utility to find and upload a new firmware. The
process takes about three to four minutes.
Note: This is not a firmware upgrade utility and cannot be used on a
working ASUS 802.11g AP . Normal firmware upgrades must be done
through the web manager.
Using a Hub
If you have problems uploading a firmware while using a network hub,
try connecting your computer directly to the LAN port. You can use either
10Base-T or 100Base-TX connections.
Launch the Firmware Restoration utility from the Windows Start menu.