Asus Z87M-PLUS - Manual (Page 39)

ASUS Z87M-PLUS 1-25
Chapter 1
6. CPU and chassis fan connectors (4-pin CPU_FAN; 4-pin CHA_FAN1-2)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside
the system may damage the motherboard components. These are not jumpers! Do not
place jumper caps on the fan connectors!
• The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.
• The CPU_FAN and CHA_FAN connectors support the ASUS Fan Xpert 2 feature.
CHA_FAN2
CH
A
FAN PWM
CH
A
FAN IN
CH
A
FAN PWR
GND
CHA_FAN1
CH
A
FAN PWM
CH
A
FAN IN
CH
A
FAN PWR
GND
CPU_FAN
CPU
FAN PWM
CPU
FAN IN
CPU
FAN PWR
GND
Z87M-PLUS
Z87M-PLUS Fan connectors
7. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
• We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.
• If you want to connect a high-definition or an AC’97 front panel audio module to this
connector, set the Front Panel Type item in the BIOS setup to [HD] or [AC97].
Z87M-PLUS
Z87M-PLUS Front panel audio connector
AAFP
AGND NC SENSE1_RETUR SENSE2_RETUR
PORT1 L PORT1 R PORT2 R
SENSE_SEND
PORT2 L
HD-audio-compliant
pin definition
PIN 1
AGND NC NC NC
MIC2
MICPWR
Line out_R
NC
Line out_L
Legacy AC’97
compliant definition