Asus Z87M-PLUS - Manual (Page 82)

3-24 Chapter 3: BIOS setup
Chapter 3
Limit CPUID Maximum [Disabled]
When set to [Enabled], this item allows the legacy OS to boot even without support for CPUs
with extended CPUID functions. Configuration options: [Enabled] [Disabled]
Execute Disable Bit [Enabled]
Execute Disable prevents certain classes of malicious buffer overflow attacks when combined
with a supporting OS (SuSE Linux 9.2, RedHat Enterprise 3 Update 3). Configuration options:
[Disabled] [Enabled]
Intel Virtualization Technology [Disabled]
When set to [Enabled], a VMM can utilize the additional hardware capabilities provided by
Vanderpool Technology. Configuration options: [Disabled] [Enabled]
Hardware Prefetcher [Enabled]
Allows you to enable or disable the Mid Level Cache (L2) streamer prefetcher. Configuration
options: [Disabled] [Enabled]
Adjacent Cache Line Prefetch [Enabled]
Allows you to enable or disable the Mid Level Cache (L2) prefetching of adjacent cache lines.
Configuration options: [Disabled] [Enabled]
Boot Performance mode [Max Non-Tu...]
Allows you to select the performance state that the BIOS will set before OS handoff.
Configuration options: [Max Non-Turbo performance] [Max Battery] [Turbo Performance]
Dynamic Storage Accelerator [Disabled]
Allows you to enable or disable Dynamic Storage Accelerator for C state configuration.
Configuration options: [Enabled] [Disabled]
CPU Power Management Configuration
This item allows you to manage and configure the CPU’s power.
Enhanced Intel SpeedStep Technology [Enabled]
Allows your system to adjust the processor’s voltage and cores frequency, resulting in
decreased power consumption and heat production.
[Disabled] The CPU runs at its default speed.
[Enabled] The system controls the CPU speed.
Turbo Mode [Enabled]
Allows you to automatically set the processor cores to run faster than the base
frequency when operating below power, current and temperature specification limit.
Configuration options: [Enabled] [Disabled]