Asus WL-AM604g - Manual (Page 24)

WL-AM604g 11g WiFi ADSL Router User Manual
22
LINK AP ACT xDSL LAN 4 3 2 1 !
MAC filter
You can set up MAC filters to allow or deny wireless clients with known MAC addresses.
To set up MAC filter:
1. Click
Wireless -> MAC Filter in the left side menu to open the configuration page.
2. Select the restriction mode for the filter: select Allow to allow the client and deny
the rest; select Deny to deny the client and allow the rest. By default, the filter is set
to Disable which allows all clients. Click Add to create a filter.
2. Type the MAC address of the wireless client you want to allow or block.
3. Press
Save/Apply to save and activate the settings.
Wireless bridge
You can connect WL-AM604g to other wireless bridges so as to expand your wireless
LAN. This function is also refer to as the Wireless Distribution System (WDS).
To set up WDS, the wireless routers must meet the following requirements:
1. Using the same encryption.
2. Working on the same channel.
3. The IP addresses of all wireless bridges are within the same subnet.
4. WDS enabled.
5. For bridging wireless routers, the MAC Addresses of the uplink wireless router must
be saved to the Remote Bridge List. For uplink wireless router, MAC addresses of
all bridging router must be saved.
Example: WL-AM604g(wireless bridge with Internet access), WL-500gP (wireless
bridge), and WL-500gD (wireless bridge). Refer to the illustration on the next page.
WL-AM604g WL-500gD WL-500gP
SSID ASUS ASUS ASUS
DHCP server Enabled Disabled Disabled
LAN IP address 192.168.1.1 192.168.1.2 192.168.1.3
Authentication Open Open Open
Encryption WEP-128bit WEP-128bit WEP-128bit
Remote bridge 00:01:00:01:01:02
00:01:00:01:01:03 00:01:00:01:01:01 00:01:00:01:01:01
MAC address 00:01:00:01:01:01 00:01:00:01:01:02 00:01:00:01:01:03
Channel 11 11 11