Asus WL-AM604g - Manual (Page 31)

WL-AM604g 11g WiFi ADSL Router User Manual
2
LINK AP ACT xDSL LAN 4 3 2 1 !
Setting up the default gateway
This section allows you to manually set up the default gateway of Internet connection.
1. Click
Advanced Setup -> Routing -> Default Gateway to open the configuration page.
2. By default, automatic assigned default gateway is enabled, that is, the router
accepts the first received gateway assignment from ISP. If your ISP specifies a
gateway, uncheck Enable Automatic Assigned Default Gateway and enter the
gateway address.
3. Press Save/Apply to save and activate the settings.
Setting up the static route
For simple networks with only one router, you do not need to set up the static route. For
more complicated network such as an enterprise network where several routers and
different subnets exist, you need to configure static routes so as to direct the network
traffic correctly.
1. Click
Advanced Setup -> Routing -> Static Route to open the configuration page
and view the current static route settings. Press Add to create a new static route.
2. The configurable settings include:
• Destination Network: Key in the destination IP address.
• Subnet Mask: Key in the destination subnet mask.
• Use Gateway IP Address: Key in the gateway network address (optional).
• User Interface: Select the interface of your router to which the static route
applies.
3. Press Save/Apply to save and activate the settings.