Asus GX1026i - Manual (Page 12)

12 GX1026i Smart Ethernet Switch
Load Default Setting
This page enables you to restore the switch’s default settings, except the IP
address, username and password.
To recover the system’s default settings, click Administrator > Load Default
Setting, then click Load.
Firmware Update
This page enables you to update the switch’s firmware version.
To update the firmware:
1. Click Administrator > Firmware Update.
2. Key in the password, then key in again to confirm.
3. Click Update, then select the firmware binary file. The uploading process will be
completed in about 40 seconds.