Asus GX1026i - Manual (Page 7)

GX1026i Smart Ethernet Switch 
Connecting network devices
GX1026i has an auto-MDI/MDIX crossover detection function and provides
plug-and-play capability. Just simply connect your computer and other network
devices to enjoy the switch’s features.
To connect network devices to the GX1026i switch:
1. Connect one end of the Ethernet cable to an Ethernet port on the switch front
panel. Connect the other end to the Ethernet port of the network device. Repeat
this step to connect additional network devices.
2. Plug one end of the power cable to the power connector on the switch rear
panel, then plug the other end to a power outlet.
3. The Power LED and LAN LED indicators for active Ethernet ports light up when
the switch is powered on and active nodes are connected to the LAN ports.
Refer to the front panel illustration and LED table in page 6 for details.
• We recommend the use of Category 5 Ethernet straight-through
cables to ensure proper connections between the switch and other
network devices.
• You can use either cross-over or straight-through cables to connect
other network devices such as bridges, switches, hubs, and
repeaters.
1 2
Desktop
Router
Printer
Server
Wireless AP
Switch / Hub
NAS
Notebook
Server