Chapter 1 – Asus Z87-WS User Manual
Page 50
1-34
Chapter 1: Product introduction
Chapter 1
DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
You can connect the front panel USB cable to the ASUS Q-Connector (USB, dark brown)
first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis
supports front panel USB ports.
•
The USB 2.0 module is purchased separately.
•
These connectors are based on xHCI specification. We recommend you to install the
related driver to fully use the USB 2.0 ports under Windows
®
7.
6.
USB 2.0 connectors (10-1 pin USB1112, USB1314; USB10)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 MBps connection speed.