Asus WL-130N - Manual (Page 9)

ASUS WLAN Adapter 9
Chapter 2 - Installation
Chapter 2 Installation
Configuring with ASUS WLAN Settings utility
(Infrastructure)
Use ASUS WLAN Settings utility to get connected with an existing wireless
network.
6. Check the Connection tab to see the
signal strength. Click OK to exit the utility.
5. Check the Status page to see the
association state. If connection is
established, the box shows “Connected -
xx:xx:xx:xx:xx:xx”.
3. Use Site Survey if you don’t know the
SSID of your access point(s).
4. Encryption settings must match those
at the access point. Ask your network
administrator about settings if necessary.
Click Apply to activate the settings.
1. Right-click the wireless connection icon
and select Wireless Settings.
2. Check the Config page to set the SSID
(network name) to that of your wireless AP.