Asus 27T1E User Manual
Page 30
ASUS LCD TV Monitor T1 Series
20
5. Display
▪
Aspect Ratio: to change the aspect ratio of the displaying image among
Wide, Square, Zoom1, Zoom2, Panorama, and Auto
-
Wide: to fit pictures to 16:9 wide full screen
-
Square: to leave the left and right sides of the screen blank to display
4:3 format pictures
-
Panorama: to fit the 4:3 signal into the 16:9 wide screen by keeping the
centre of the picture in the same aspect ratio and stretching the both
sides more
-
Zoom1: to stretch the centre of 2.35:1 pictures to the top and bottom of
the screen and leave the left and right sides of the picture outside the
screen being un-displayed
-
Zoom2: to stretch the centre of 1.85:1 pictures to the top and bottom of
the screen and leave the left and right sides of the picture outside the
screen being un-displayed
-
Auto: to automatically select the screen aspect ratio according to the
broadcasting signal
▪
Auto Configuration: to automatically adjust the display parameters for VGA
signal. This function is active only for VGA input.
This function can be activated also by pressing
key on the key pad of
the display set when VGA input in use.
▪
Manual Configuration: to specify the display position, clock, and phase of
the display for VGA signal. This function is active only when VGA input
source is selected.
6. Time
▪
Clock: to set the current time. This function is inactive when “Sync Time” is
on.
▪
Off Time: to specify the time when the display automatically turns off. The
off-time can be set one-time or repeated.
▪
On Time: to specify the time when the display automatically turns on. You
can also specify the signal source and volume when it is turned on. The
on-time can be set one-time or repeated.
▪
Auto Off: to switch the display off when no signal from the input source is
detected for 10 minutes.
▪
Time Zone: to specify your time zone.
▪
Sync Time: to automatically get time information from broadcasting signal
▪
Sleep Timer: to set a countdown of 15, 30, 60, 90, 120, 180, 240 minutes till
the display automatically switches off.