Asus AP120-E1 - Manual (Page 55)

ASUS P4P800S-E motherboard user guide 2-29
13. Serial port 2 connector (10-1 pin COM2)
This connector accommodates a second serial port using an optional
serial port bracket. Connect the bracket cable to this connector then
install the bracket into a slot opening at the back of the system chassis.
14. System panel connector (20-pin PANEL1)
This connector accommodates several system front panel functions.
• System Power LED Lead (3-1 pin PLED)
This 3-1 pin connector connects to the system power LED. The LED
lights up when you turn on the system power, and blinks when the
system is in sleep mode.
The serial port bracket (COM2) is purchased separately.
P4P800S-E
®
P4P800S-E Serial COM2 Bracket
PIN 1
COM2
P4P800S-E
®
P4P800S-E System Panel Connectors
* Requires an ATX power supply.
PLED-
PWR
+5V Speaker
Speaker
Connector
Power LED
Ground
Reset SW
Ground
Reset
Ground Ground
ATX Power
Switch*
PLED+
IDE_LED- IDE_LED+
IDE_LED