Asus RT-N12HP User Manual
Page 43
The Firmware Restoration utility is not used to upgrade the
firmware of a working ASUS Wireless Router. Normal firmware
upgrades must be done through the web GUI. Refer to
Upgrading the firmware for more details.
. Click Browse to navigate to the firmware file, then click Upload.
. While holding down the Reset button at the back of the
wireless router, plug the wireless router into a power source.
Release the Reset button when the Power LED at the front
panel begins to flash slowly, which indicates that the wireless
router is in rescue mode.
. Use the following to set up your TCP/IP settings:
IP address: 19.1.1.x
Subnet mask: ...0
. From your computer’s desktop, click
Start > All Programs > ASUS Utility > RT-N12 Wireless
Router > Firmware Restoration.