Asus RT-N12HP - Manual (Page 8)


Rear (RT-N12 D1)
Label Description
Reset
Press this button for more than five seconds to restore the
system to its factory default settings.
Power
Press this button to power on/off the wireless router.
Insert the AC adapter into this port to connect your router to
a power source.
LAN1-LAN4
Connect RJ- Ethernet cables to these ports to establish
LAN connection.
WAN
Connect an RJ- Ethernet cable to this port to establish
WAN connection.
WPS Press this button for more than four seconds to establish a
secure wireless connection with a WPS-supported wireless
device.