Asus Z5 - Manual (Page 36)

4-4 Chapter 4: Client-server setup
3. Connect the Z5 Zero Client device to a monitor, mouse, keyboard and switch
or router. Turn on the Z5 Zero Client device and check the Connect LED’s
status.
If the client was assigned and used from a previous server, release the
client from the previous server and assigned it to your new server.
If the client is using the old firmware, the server automatically updates it
with the latest firmware.
When the server is updating the client’s firmware, the power button’s LED blinks
from orange to blue.
•
•
If the LED indicator is blinking, the client is still searching for the IP address.
4. In WMS 2011 menu, click .
5. Check the client’s list to confirm the clients found in the domain.