Asus Z9PA-U8 - Manual (Page 104)

4-42 Chapter 4: BIOS setup
4.8 Monitor menu
The Monitor menu displays the system temperature/power status, and allows you
to change the fan settings.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Event Logs Boot Monitor Security Tool Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
CPU1 Temperature 56.0ºC/132.8ºF
TR1 Temperature 41.3ºC/106.3ºF
TR2 Temperature 31.1ºC/87.9ºF
CPU FAN1 Speed N/A
FRNT FAN1 Speed N/A
FRNT FAN2 Speed 5421 RPM
FRNT FAN3 Speed N/A
FRNT FAN4 Speed N/A
REAR FAN1 Speed N/A
+VTT_CPU +1.056 V
VCORE1 +0.992 V
+VDDQ_AB_CPU1 N/A
+VDDQ_CD_CPU1 +1.490 V
+5VSB +5.030 V
+5V +5.017 V
+12V +11.712 V
+3.3V +3.372 V
VBAT +3.264 V
+3.3VSB +3.366 V
FAN Speed Control [Generic Mode]
CPU 1; TR1 1/2 Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU and
motherboard component temperatures.
CPU FAN1 Speed; FRNT FAN1–4 Speed; REAR FAN1 Speed
[xxxx RPM] or [N/A]
The onboard hardware monitor automatically detects and displays the speed of
CPU fans, front fans, and rear fan in rotations per minute (RPM). If the fan is not
connected to the motherboard, the field shows N/A.
+VTT_CPU Voltage, VCORE1 Voltage, +VDDQ_AB/CD_CPU1 Voltage,
+5VSB Voltage, +5V Voltage, +12V Voltage, +3.3V Voltage, VBAT
Voltage, +3.3VSB Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators.
FAN Speed Control [Generic Mode]
Allows you to configure the ASUS Smart Fan feature that smartly adjusts the fan
speeds for more efficient system operation.
Configuration options: [Generic Mode] [High Speed Mode] [Full Speed Mode]