Asus RT-N10U - Manual (Page 15)

15 Chapter : Setting up the hardware RT-N10U
Using QIS without auto-detection
To use QIS without auto-detection:
1. In your web browser, key in http://192.168.1.1
. Under Internet status, click GO in the Quick Internet Setup field.
Select your next preferred task from any of these options:
1. Going to Internet: Click to start surfing the Internet or do Internet-
related activities such as chat, or read/write e-mail messages.
. Advanced Setting page: Click to go to the wireless router’s
Advanced Setting page and configure more advanced wireless
settings.
3. Add to Favorites: Click to add the router’s web interface to your
Favorites.
3. Select your connection type from these types of ISP services: Dynamic IP,
PPPoE, PPTP, L2TP, and Static IP. Key in the necessary information for your
ISP connection type.
. Click Apply all settings to save the settings.
Important: Obtain the necessary information about your Internet connection type from your ISP.
Note: If you choose options  and 3, you will need to log into the web GUI. For more details,
refer to the section Configuring via the web GUI in this user manual.