Asus RT-N10U - Manual (Page 9)

9 Chapter 1: Knowing your wireless router RT-N10U
Rear panel
Item Description
1
Reset button
Press this button for more than five seconds to reset the system to
its factory default settings.
2
Power switch
Press this button to turn the power on/off.
3
Power (DC-In) port
Insert the AC adapter into this port to connect your router to a
power source.
4
WAN port
Connect an RJ-5 Ethernet cable to this port to establish WAN
connection.
5
LAN 1 ~ 4 ports
Connect RJ-5 Ethernet cables to these ports to establish LAN
connection.
6
WPS button
Press this button to establish wireless connection.
7
USB 2.0 port
Insert a USB device into this port.
Reset Power
WAN LAN4 LAN3 LAN2 LAN1 WPS USB
1
2 3 4 5 6
7