4 resetting disks to non-raid, Resetting disks to non-raid -30 – Asus RS320Q-E7/RS12 User Manual
Page 124
6-30
Chapter 6: RAID configuration
6.3.4
Resetting disks to Non-RAID
Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a
RAID volume hard disk drive deletes all internal RAID structure on the drive.
To reset a RAID set hard disk drive:
1.
From the utility main menu, select 3. Reset Disks to Non-RAID and press <Enter>.
The following screen appears.
2.
Use the up/down arrow keys to select the RAID set drive(s) you want to reset, and then
press <Space> to select.
3.
Press <Enter> to reset the RAID set drive(s). A confirmation message appears.
4.
Press <Y> to reset the drive(s) or press <N> to return to the utility main menu.
Resetting RAID disk will remove its RAID structures
and revert it to a non-RAID disk.
WARNING: Resetting a disk causes all data on the disk to be lost.
(This does not apply to Recovery volumes)
Port Drive Model Serial # Size Status
0 ST3160812AS 9LS0HJA4 149.0GB Member Disk
1 ST3160812AS 9LS0F4HL 149.0GB
Member Disk
Select the disks that should be reset.
[↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete
[
RESET RAID DATA
]