Asus PIKE 9230 - Manual (Page 18)

2-6 Chapter 2: Driver installation
2.2 Support CD information
The support CD that came with the SATA RAID card package contains the drivers
that you can install to avail all product features.
The contents of the support CD are subject to change at any time without
notice. Visit the ASUS website (www.asus.com) for updates.
2.2.1 Running the support CD
Place the support CD to the optical drive. The CD automatically displays the
Drivers menu if Autorun is enabled in your computer.
• You have to install the PIKE 9230 SATA RAID card on your motherboard
BEFORE you can launch the Autorun function of the support CD.
• If Autorun is NOT enabled in your computer, browse the contents of the
support CD to locate the file ASSETUP.EXE from the BIN folder. Double-click
the ASSETUP.EXE to run the CD.
2.2.2 Utilities menu
The Utilities menu shows the available device drivers if the system detects
installed devices. Install the necessary drivers to activate the devices.
The screen display and driver options may vary under different operating
system versions.
Before installing the Marvell Storage Utility, ensure that:
• Your PIKE 9230 RAID card has been properly installed.
• You have installed the RAID controller drivers.
• You have properly connected the SATA hard disk drives to your PIKE 9230
RAID card.